Almost all primer sets target regions within the 16S rRNA gene with a few exceptions targeting the 16S–23S check details rRNA gene intergenic spacer region and/or the 23S rRNA gene. For simplicity, only the term ‘16S’ is used in the following. The specificity of all primer sets was initially evaluated in silico using nucleotide blast (Altschul et al., 1990) and the Ribosomal Database Project (RDP; Cole et al., 2009). One hundred and ten primer sets found to be suitable after this screening process were synthesized commercially by Eurofins MWG operon GmbH (Ebersberg, Germany). Quantitative real-time PCR was performed on an ABI prism 7900HT

from Applied Biosystems (Nærum, Denmark). All amplification reactions were carried out in transparent 384-well MicroAmp® Optical reaction plates (Applied Biosystems) and sealed with MicroAmp® Selleck AZD2281 Optical Adhesive Film in a total volume of 11 μL containing 5.5 μL 2× SYBR Green PCR Master Mix (Applied Biosystems), 0.4 μL of each primer (10 μM), 2 μL template DNA (2 ng), and 2.7 μL nuclease-free water (Qiagen GmbH, Hilden, Germany). Liquid handling was performed with an epMotion 5075 (Eppendorf, Hørsholm, Denmark). The amplification program was identical for all

amplifications and consisted of one cycle of 50 °C for 2 min; one cycle of 95 °C for 10 min; 40 cycles of 95 °C for 15 s and 60 °C for 1 min; and finally dissociation curve analysis for assessing amplicon specificity (95 °C for 15 s, 60 °C for 15 s, then increasing to 95 °C at 2% ramp rate). Initial qPCR screening on extracted Unoprostone mixed human fecal DNA from healthy volunteers was used in order to identify and remove primer sets, which did not amplify the expected target from this matrix. Fecal DNA was obtained from the control group of a previously conducted study and

was extracted using the QIAamp DNA Stool Mini Kit (Qiagen) preceded by a bead-beater step as previously described (Leser et al., 2000; Licht et al., 2006). A subset of 58 primer sets (of the 110), selected based on their ability to generate amplification products from the complex fecal DNA template material, was used for further evaluation of target specificity on pure culture DNA. The 58 primer sets were tested against extracted DNA from 27 bacterial strains, and one archaeal strain, using the PCR conditions listed above. Reactions were performed in duplicate using 2 ng of DNA as template and always including the universal bacterial primers (reference gene) on the same plate. The generated PCR products were assessed by dissociation curve analysis and 2% agarose gel electrophoresis, stained with SYBR Green, to determine the homogeneity and length of the amplification product, respectively.