8 The aim of present investigation is to prepare aquasomes for a

8 The aim of present investigation is to prepare aquasomes for a poorly soluble drug, pimozide (antipsychotic drug)9, 10 and 11 to improve the aqueous solubility on oral administration. Aquasomes can be prepared selleck screening library in three stages, i.e., preparation of ceramic core, carbohydrate coating and drug adsorption. Three different techniques were employed for preparation of ceramic core, i.e., co-precipitation by reflux, self precipitation

technique and co-precipitation by sonication. Lactose sugar was adsorbed over prepared ceramic core followed by adsorption of pimozide drug to get the three layered aquasomes. Pimozide was a gift sample from Vasudha Pharma Chem Ltd, Hyderabad. Calcium chloride dihydrate, disodium hydrogen orthophosphate and lactose monohydrate were from S.D. Fine Chemicals see more Ltd., Mumbai, India. Anthrone reagent was from Loba chemicals, Mumbai, India. Other chemicals and reagents were of analytical grade. 0.19 N diammonium hydrogen phosphate solutions was added drop wise with continuous stirring to 0.32 M calcium nitrate solution maintained at 75 °C in a three-necked flask bearing one charge funnel, a thermometer, and a reflux condenser fitted

with a CO2 trap.12 The reaction involved is: 32(4NH)4HPO+3Ca2(3NO)→3Ca2(4PO)+64NH3NO+H34PO3(NH4)2HPO4+3Ca(NO3)2→Ca3(PO4)2+6NH4NO3+H3PO4 During the addition, the pH of calcium nitrate was maintained in the range 8–10 using concentrated aqueous ammonia solution. The mixture was then stirred for 4–6 days at the same temperature and pH. The precipitate was filtered, washed thoroughly with double distilled

water, and finally dried at 100 °C overnight. In this method, the simulated body fluid of pH 7.2 containing sodium chloride (134.8 mM), potassium chloride (5.0 mM), magnesium chloride (1.5 mM), calcium chloride (2.5 mM), sodium hydrogen carbonate (4.2 mM), disodium hydrogen phosphate (1.0 mM), and disodium sulfate (0.5 mM) was used. The pH of the solution was adjusted to 7.26 every day with hydrochloric acid. This solution was transferred to a series of polystyrene bottles of 100 ml capacity. The bottles were tightly sealed and kept at 37 ± 1 °C for one week. The formation of precipitate was then observed on the inner surface of the bottles. The precipitate was filtered, washed thoroughly with double distilled water, and finally dried Levetiracetam at 100 °C.12 0.75 M solution of disodium hydrogen phosphate was slowly added to 0.25 M solution of calcium chloride under sonication at 4 °C.13 The reaction involved is: 3Na2HPO4+3CaCl2→Ca32(PO4)+6NaCl+H3PO43Na2HPO4+3CaCl2→Ca3(PO4)2+6NaCl+H3PO4 The precipitate (calcium phosphate) was separated by centrifugation at 15,000 rpm for 1 h and then washed five times with double distilled water to remove sodium chloride formed during the reaction. The precipitate was resuspended in the double distilled water and passed through a 0.2 μm millipore filter to collect particles less than 0.2 μm.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>