Hippo D, Nakamine Y, Urakawa K, Tsuchiya Y, Mizuta H, Koshida N,

Hippo D, Nakamine Y, Urakawa K, Tsuchiya Y, Mizuta H, Koshida N, Oda S: Formation mechanism of 100-nm-scale periodic structures in silicon using magnetic-field-assisted anodization. Jpn J Appl Phys 2008, 47:7398. 10.1143/JJAP.47.7398CrossRef 6. Sampaion

L, Sinnecker EHCP, Cernicchiaro GRC, Kobel M, Vazquez M, Velazquez J: Magnetic microwires as macrospins in a long-range dipole-dipole interaction. Phys Rev B 2000, 61:8976. 10.1103/PhysRevB.61.8976CrossRef 7. Bahiana M, Amaral FS, Allende S, Altbier D: Reversal modes in arrays of interacting magnetic Ni nanowires: Monte Carlo simulations and scaling www.selleckchem.com/products/mk-4827-niraparib-tosylate.html technique. Phys Reb B 2006, 74:174412.CrossRef 8. Rusetskii MS, Kazyuchits NM, Baev VG, Dolgii AL, Bondarenko VP: Magnetic anisotropy of nickel nanowire array in MK-1775 solubility dmso porous silicon. Tech Phys Lett 2011, 37:391. 10.1134/S1063785011050142CrossRef 9. Carignan L-P, Lacroix C, Ouimet A, Ciureanu M, Yelon A, Menard D: Magnetic anisotropy in arrays of Ni, CoFeB, and LY2874455 clinical trial Ni/Cu nanowires. J Appl Phys 2007, 102:023905.

10.1063/1.2756522CrossRef 10. Zighem F, Maurer T, Ott F, Chaboussant G: Dipolar interactions in arrays of ferromagnetic nanowires: a micromagnetic study. J Appl Phys 2011, 109:013910. 10.1063/1.3518498CrossRef Competing interests The authors declare that they have no competing interests. Authors’ contributions KR and PG fabricated the samples by conventional etching and performed all the electrodeposition and also carried out the magnetization measurements. NK provided the magnetic field-assisted porous silicon samples.

PP performed the SEM this website investigations. All authors discussed the data and prepared the manuscript. All authors read and approved the final manuscript.”
“Background Nanoporous anodic alumina (NAA) is one of the smartest materials in which scientists have centered their research with considerable interest in recent years [1, 2] due to their physicochemical properties like thermal stability, environmental toughness, and biocompatibility. Alumina has been studied for decades [3]. The fabrication technology permits to obtain highly ordered and customized porous nanostructures that makes NAA very attractive for different applications such as nanomaterial synthesis [4, 5], photonics [6], or sensors [7–9]. In particular, NAA has demonstrated its sensing capabilities: a great wealth of work has been carried out with this material in biotechnology areas [10], and it presents reliable possibilities of working as portable chemical and biochemical sensors [11], as well as label-free biosensors [12]. Furthermore, if the optical waveguide properties of NAA are exploited, much higher sensitivities than conventional surface plasmon resonance (SPR) sensors [2, 13, 14] can be achieved. Sensors based on alumina improve their sensitivity by the measurement of the oscillations in the reflectance spectrum produced by the Fabry-Pérot (F-P) interferences in a NAA thin film [15, 16].

Comments are closed.