The antibody coated fibers could be stored at 4°C until use. The fibers were washed again in PBST and placed in reaction chambers containing 100 μL of freshly harvested bacterial suspensions (Table  1) at various concentrations (1 × 103 to 1 × 108 CFU/mL) and incubated for 2 h at RT. Following gentle washing with PBS, the fibers were exposed to Cy5-labeled anti-InlA antibody for 2 h at 4°C, washed with PBST, and signals were acquired with an Analyte 2000 Fluorometer (Research International Co., Monroe, WA). The fluorescence intensity signals were recorded for each fiber for 30 s [46]. For each treatment, 3–5 waveguides were used, and mean values ± SD for

each experiment were presented. Confirmation of captured bacteria using an optical Z-IETD-FMK purchase light-scattering sensor An automated light-scattering sensor, BARDOT (BActerial Rapid Detection using Optical click here light-scattering Technology; Advanced Bioimaging

Systems, LLC, West Lafayette, IN) was used to identify colonies of Listeria captured by IMS (described above) on BHI or MOX agar plates [19, 61]. This system collects scatter images of bacterial colonies (diameter, 1.3 ± 0.2 mm) through a diode laser (635 nm), and the bacteria were identified by comparing scatter images with library-stored images [61]. Before conducting the food sample testing experiment, initial experiments were performed to determine the capture rate of IMS for Sinomenine L. monocytogenes and L. innocua, present at 106 CFU/mL each in a mixture in PBS, followed by BARDOT analysis. Real-time quantitative PCR (qPCR) PMB-captured bacteria were also analyzed by qPCR. To eliminate PCR inhibitors, the DNA was purified from captured bacteria using the DNeasy Blood and Tissue Kit (Qiagen) by treating

the PMB–bacteria complexes (100 μL) with 180 μL lysis buffer (20 mM Tris–HCl, pH 8.0; 2 mM sodium EDTA; 1.2% Triton X-100; 20 mg/mL lysozyme) followed by incubation at 37°C for 30 min. PMBs were removed from the solutions by using MPC-S (Invitrogen), and the LY2835219 supernatant was pipetted onto the columns. DNA was eluted in 100 μL of elution buffer and used for qPCR. Primers specific for hlyA (hlyA-For, 5′-TGCAAGTCCTAAGACGCCA-3′ and hlyA-Rev, 5′-CACTGCATCTCCGTGGTATACTAA-3′) of L. monocytogenes were used for detection [67]. Primers for 16 s (Lis-16 s-For, 5′- CACGTGGGCAACCTGCCTGT-3′ and Lis-16 s-Rev, 5′- CTAATGCACCGCGGGCCCAT-3′) were used as an internal control. The qPCR was performed using Power SYBR Green Master Mix (Applied Biosystems, Foster City, CA) with 5 μL of DNA template in a 20-μL total reaction volume and analyzed in triplicate. PCR amplification was carried out in a StepOnePlus Real-Time PCR System (Applied Biosystems) under the following conditions: 1 cycle of 95°C for 10 min for denaturation, followed by 40 cycles of 95°C for 20 s, 58°C for 1 min, and 95°C for 1 min for the dissociation curve. To construct the standard curves, DNA from L.